Aka Signum MFD 7272M Metal Detector with 9″x12″, 7 kHz coil

Description

AKA Signum MFD AKA Signum MFD is the same as AKA Signum MFT but with DEEP program added and minor software updates. DEEP program DEEP program is designed to find and identify large objects at depth under carpet consisting of small participles (E.g.: rusted nails and small iron laying just about surface) with medium (10″/9,5″x12,5″) and large (13″/15″) coils. DEEP program is an actual substitute to classic deep scanning units like Whites TM-808/Pulse Star circle of relatives but with ability to identify metal type (iron/non ferrous) in case of good signal strength. Signum MFD might be turned into deep scanning unit and restored back as a VLF detector just in 1 click – this might be useful when target needs rechecking. Minor software updates – Frequency shifting from resonance might be performed within 10% on top of coil’s frequency. Signum’s sharpness can be reduced but detector becomes less susceptible to EMI, works better on mineralized soils, trashy sites and the like – ST duration might be set on different for Each and every preset – RT volume has 9 steps now (4 steps is the same as RT present in Signum MFT now). RT setting might be set on different for Each and every preset – GS filter has 0,25 degree step As a substitute of 1 degree step to be had in Signum MFT now. Each and every preset could have its own setting – Ground Balance has 0,5 degree step – “Ground zone cut” setting. This option cuts ST in selected zone. Each and every preset could have its own setting. Signum MFD will run with less falsing (signals just about ground zone), deep-deep targets can be lost. Each and every preset could have its own setting – Screen lighting might be set to minimum level – Screen lighting might be switched off and on by long pressing “Volume” button – Economy mode might be set on different for Each and every preset.The Aka Signum MFD 7272M Metal Detector is likely one of the absolute best instrument within the Aka company’s line of production. Signum MFD 7272M has the most productive depth not only out of the Aka company’s metal detectors. Specifications for Aka Signum MFD 7272M: Patented space- harmonic filtering (SFT) technology, which significantly improves the quality of identification of objectsFunctions at a range of 1 to 30 kHzHigh sensitivity to metal targetsS-set of rules identifies flat iron targetsModern large display (made in Germany)Unique «hodograph” technology, positioned under the search coil, defines targets easily and gives their exact value.Four search programs, installed within the factory,can also be modified by the userGround Balance for a special area (automatic and manual)Automatic ground adjustment – the ability of the Aka Signum MFT to mechanically adjust to ground changes, which might inevitably happen all through search.2 search modes: dynamic and staticPinpoint function“hot spot” elimination functionOwners can change the search coil independently The Aka Signum MFD 7272M is equipped with: Electronic Keep watch over Block 1 Aka search coil DD 9×12″ 7 kHz 1 Lower and middle shafts 1 package Installation package for the search coil 1 package 6 AA battery set 1set Instruction manual 1 Moreover, the Aka Signum MFD 7272M can also be purchased with A backpack for carryingHeadphonesCover for coilCover for display Moreover, the metal detector Signum can also be modified with a different search coil Aka 6″ 7 kHz DD CoilAka 6″ 14 kHz DD CoilAka 6х10″ 7kHz DD CoilAka 6х10″ 14 kHz DD CoilAka 6х10″ 20 kHz DD CoilAka 10″ 7 kHz DD CoilAka 10″ 14 kHz DD CoilAka 9х12″ 7 kHz DD CoilAka 9х12″ 14 kHz DD CoilAka 9х12″ 3 kHz DD CoilAka 9х12″ 20 kHz DD CoilAka 13″ 7 kHz DD CoilAka 13″ 3 kHz DD CoilAka 15″ 7 kHz DD CoilAka 15″ 3 kHz DD CoilAka 9х12″ 3 ranges(3, 7, 13 kHz) DD CoilAka 13″ 3 ranges(3, 7, 13 kHz) DD Coil The entire search coils above are DD search coils. The Aka Signum MFD search coins identifies quite a lot of targets in size in addition to varieties of metal. Size maximum shaft length 120 cm ( 47 inches) maximum total length 150 cm ( 59 inches) diameter for the 10″ sensor 26cm ( 10 inches) Technical specification of the Signum MFT 7272M: Battery type 6 AA batteries Battery time 18 hours Weight without batteries 1.25 kg ( 3 lbs) Weight in package 2.1 kg (5 lbs) As a substitute of AA batteries the Signum MFT can be utilized with rechargeable batteries. Normal 0 false false false RU X-NONE X-NONE

Reviews

There are no reviews yet.

Be the first to review “Aka Signum MFD 7272M Metal Detector with 9″x12″, 7 kHz coil”

Your email address will not be published. Required fields are marked *