Minelab gold monster 1000 metal detector

Description

The GOLD MONSTER 1000 features fully automatic operation and comes with a number of coils, battery options and shaft configurations. If you are on the lookout for super sensitive gold performance at an ideal price, then that is the detector you’ve got been looking ahead to!   “I discovered my first nugget within an hour” “I discovered my first nugget within an hour; funnily enough it used to be in a detector scrape from previous excursions. All up I discovered many pieces of gold, the deepest being 3 inches in variable hot ground.”  Jonathan Porter – Professional Gold Prospector, Australia   “I used to be ready to find nine small nuggets (flakes) so easily that it used to be a little bit surprising!”  “I used to be ready to find nine small nuggets (flakes) so easily that it used to be a little bit surprising! Total weight of all nine is 7.8 grains. None were deep, perhaps 3–4 cm at most. Just enough alternatively to be just out of reach of the SDC and too small for the GPZ.”       Field Tester, NV, USA   Features Fully automatic operation  Extra sensitive 45 kHz VLF performance  Highly adaptable  2 search coils included  Easy quick start  Easy-to-Use Controls  Gold Chance Indicator High Gold Chance                                     Low Gold Chance          Detect Modes Gold (Iron Reject)                                         Deep All-Metal    Sensitivity Options                 Manual sensitivity, and two auto options; Auto, and Auto+.        Adjustable Volume                   Adjust to fit your hearing, with 6 volume levels.       Highly Adaptable       Wide ground coverage  Confined space detecting            Universal shaft adaptability           Water resistant coil (to 1m/3′)/ Rain proof keep watch over box            GOLD MONSTER 1000 outperforms all other single frequency VLF gold detectors! *Detector sensitivity comparisons are representative only. Actual performance will depend upon nugget size, detector settings and ground conditions. Up until now, there has at all times been a compromise between frequency and sensitivity when optimising detector performance, because lower frequencies are more sensitive to larger gold nuggets and higher frequencies are more sensitive to smaller gold nuggets. When comparing detectors, the three curves within the diagram represent each and every detector’s ability to find small gold nuggets of a certain size, at a maximum imaginable depth. Most detectors will discover a very large nugget just beneath the surface, alternatively a detector’s sensitivity to gold determines what number of smaller nuggets will in the end be recovered in difficult (noisy) ground at greater depths. An 18 kHz detector will generally have a depth advantage on nuggets ≥ 1.0g over a basic mid-frequency detector, and a 71 kHz detector may have a depth advantage on nuggets ≤ 0.1g. The advanced GOLD MONSTER 1000 uses an intermediate 45 kHz frequency AND a high speed 24-bit signal processor. This number one combination greatly boosts sensitivity to gold beyond that of other single frequency VLF detectors over a variety of nugget sizes, without introducing excess noise and false signals. The GOLD MONSTER 1000 also has improved ferrous/non-ferrous discrimination and copes better with conductive (salty) soils than higher frequency detectors, making it the easiest choice to maximize your gold recovery! Automatic noise cancel • Digital electronics • Auto ground balance  • Faster processor • Automatic sensitivity

Reviews

There are no reviews yet.

Be the first to review “Minelab gold monster 1000 metal detector”

Your email address will not be published. Required fields are marked *